Install Kitchen Faucet. To install a kitchen faucet, you’ll want to clear out your space and sink first. Antique champagne brass | number of handles: Turn off the sink’s water supply.
How To Install or Replace a Kitchen Faucet? from www.kitchenfaucetcenter.com
You should refrain from using putty for this step. Feed the supply tubes through the hole in the sink deck, and center the faucet body over the hole.
(See Below For A Sh.
Position the faucet where you want it and make sure it fits well before going below the sink to secure it. To install a kitchen faucet, you’ll want to clear out your space and sink first. Check the type of faucet that will work with your sink. You should refrain from using putty for this step.
Next, You Will Feed The Hoses Through The Rubber Washer, Brass Washer, And Threaded Locknut Onto The Shank From Underside The Sink Or Mounting Surface.
Place a bucket under the faucet and turn the faucet on to check for leaks. Refer to the manufacturer's instructions. Disconnect the water supply lines. Start to screw up each of the nuts by hand and.
How To Install A Kitchen Faucet?
This old house plumbing and heating expert richard trethewey heads to colorado to help a homeowner install a new kitchen sink and faucet. Close the valve, turn on the main water valve and check for leaks. 8.75 inches | spout reach: Drop in the new faucet.
Loosen The Nut Under The Faucet.
There is no deck plate included with this kitchen faucet; Install the deck gasket onto the new faucet by fitting it over the flexible supply lines and sliding it up into the faucet body. Then, turn off the water and disconnect the hose. Place the rubber or plastic gasket, or trim ring, over the faucet holes in the sink and set the deck plate.
Tidak ada komentar untuk "Install Kitchen Faucet"
Posting Komentar